How To Fix a GE Dishwasher With No Lights or Power
A GE Dishwasher troubleshooting guide
Have problems starting your GE dishwashing machine? It has no power, or the lights are out after it worked perfectly well. It is a common problem that occurs with specific models of GE Dishwashers. Worn-out parts or built-in features can cause this, or the primary circuit and touchpad board are defective and must be replaced. We’re here for you to figure out the problem with your dishwasher so that you can relax and get your dishes back to clean.
Why does your GE Dishwasher have no lights or power?
Your GE dishwasher may be having problems with power and lighting. This can be due to several reasons. The repair is simple and can be done with just a few essential tools.
GE Dishwasher No Lights or Power – What to Do First?
It’s best to check out the most accessible items first before disassembling your machine and replacing parts that were never damaged. Before moving on, check the door latch. Over time, some GE models can lose their latch, causing them to stop working and resulting in your dishwasher not starting. Check the latch on your dishwasher by opening it and closing it. If you find that it is not functioning correctly, then it needs to be replaced. Disable the Child Lock. Specific GE models come with a child lock that prevents them from turning on and starting when engaged. The process to deactivate the feature is different for each model. Consult your manual to learn how to do it. Your dishwasher will typically light up and power on once the child lock feature is disabled.
GE Dishwasher Power issues
This is likely why your GE dishwasher is not working correctly. This includes the wall socket, power supply, and control board. The dishwasher’s performance is affected by each component, some more than others. You don’t have to worry about anything; we will guide you in what to fix and how.
Check Your Wall Outlet
Ensure the wall outlet supplying power to your GE dishwashing machine is safe and compatible. It’s essential to use a non-contact tester like this one to ensure the power from the outlet is enough. Consider using a different wall outlet if the voltage is low. It is essential to check the wall outlet’s fit, as appliances kept in the exact location can often slip out. Consider replacing the outlet if you find that the dishwasher plug can easily fall out.
GE Dishwasher has no power or lights
The control board or the user interface panel of your GE dishwasher may be malfunctioning. Both can be tested and repaired if needed. These guides will help you diagnose the problem so that you can replace it.
How to diagnose your GE dishwasher
Ensure that the dishwasher is powered and plugged into the wall outlet. Remove the kick plate at the front of the dishwasher with a wrench or screwdriver. Test the power supply terminals with a multimeter. If it shows 120 volts or less, the dishwasher is working fine. The problem is most likely with the fuse box or home electricity. Turn off your circuit breaker or unplug the dishwasher for a moment while working with sensitive electrical equipment. Remove the screws that hold the control panel with a screwdriver. Disconnect the wire harness that is attached to the control panel. Locate the five pins at the far left of the circuit board facing you. Touch one probe of your multimeter to the second pin and the fifth pin from the left. If your multimeter shows a reading of 14 volts or less, the problem is with the user interface panel. If it doesn’t, you will need to replace the control board.
How do you fix your GE Dishwasher Control Board?
If the control board does not measure at or around 14 Volts when tested, it must be replaced immediately. Your dishwasher will then work usually, and your dishes will be clean! Our vast selection of GE circuit boards and control boards for your dishwasher. Here is the guide on replacing one: follow the steps below to get to the control panel housing. Remove all wire harnesses attached to the circuit boards and unscrew any screws. Install the replacement circuit board and remove the old one. Install the new circuit by plugging the appropriate wire harnesses in and screwing on any screws. Replacing the control circuit board in position, thread the screws that secure it. Plug the dishwasher into a wall outlet to test it or restore power. Install the kickplate after the power is restored to the dishwasher. If you reach this point, your dishwasher will be working as usual! If your GE Dishwasher still won’t power up or light, you may need to call a technician.